Single chain elasticity and thermoelasticity of polyethylene

Single-chain elasticity of polyethylene at $\theta$ point up to 90% of stretching with respect to its contour length is computed by Monte-Carlo simulation of an atomistic model in continuous space. The elasticity law together with the free-energy and the internal energy variations with stretching are found to be very well represented by the wormlike chain model up to 65% of the chain elongation, provided the persistence length is treated as a temperature dependent parameter. Beyond this value of elongation simple ideal chain models are not able to describe the Monte Carlo data in a thermodynamic consistent way. This study reinforces the use of the wormlike chain model to interpret experimental data on the elasticity of synthetic polymers in the finite extensibility regime, provided the chain is not yet in its fully stretched regime. Specific solvent effects on the elasticity law and the partition between energetic and entropic contributions to single chain elasticity are investigated.Comment: 32 pages with 5 figures included. Accepted as a regular paper on The Journal of Chemical Physics, August 2002. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physic

On the force-velocity relationship of a bundle of rigid bio-filaments

In various cellular processes, bio-filaments like F-actin and F-tubulin are able to exploit chemical energy associated with polymerization to perform mechanical work against an obstacle loaded with an external force. The force-velocity relationship quantitatively summarizes the nature of this process. By a stochastic dynamical model, we give, together with the evolution of a staggered bundle of Nfrigid living filaments facing a loaded wall, the corresponding force-velocity relationship. We compute the evolution of the model in the infinite wall diffusion limit and in supercritical conditions (monomer density reduced by critical density ρ^1>1), and we show that this solution remains valid for moderate non-zero values of the ratio between the wall diffusion and the chemical time scales. We consider two classical protocols: the bundle is opposed either to a constant load or to an optical trap setup, characterized by a harmonic restoring force. The constant load case leads, for each F value, to a stationary velocity Vstat(F;Nf,ρ^1) after a relaxation with characteristic time τmicro(F). When the bundle (initially taken as an assembly of filament seeds) is subjected to a harmonic restoring force (optical trap load), the bundle elongates and the load increases up to stalling over a characteristic time τOT. Extracted from this single experiment, the force-velocity VOT(F;Nf,ρ^1) curve is found to coincide with Vstat(F;Nf,ρ^1), except at low loads. We show that this result follows from the adiabatic separation between τmicroand τOT, i.e., τmicro≈ τOT

Compressive force generation by a bundle of living biofilaments

To study the compressional forces exerted by a bundle of living stiff filaments pressing on a surface, akin to the case of an actin bundle in filopodia structures, we have performed particulate Molecular Dynamics simulations of a grafted bundle of parallel living (self-assembling) filaments, in chemical equilibrium with a solution of their constitutive monomers. Equilibrium is established as these filaments, grafted at one end to a wall of the simulation box, grow at their chemically active free end and encounter the opposite confining wall of the simulation box. Further growth of filaments requires bending and thus energy, which automatically limit the populations of longer filaments. The resulting filament sizes distribution and the force exerted by the bundle on the obstacle are analyzed for different grafting densities and different sub- or supercritical conditions, these properties being compared with the predictions of the corresponding ideal confined bundle model. In this analysis, non-ideal effects due to interactions between filaments and confinement effects are singled out. For all state points considered at the same temperature and at the same gap width between the two surfaces, the force per filament exerted on the opposite wall appears to be a function of a rescaled free monomer density $\hat{\rho}_1^{\rm eff}$. This quantity can be estimated directly from the characteristic length of the exponential filament size distribution $P$ observed in the size domain where these grafted filaments are not in direct contact with the wall. We also analyze the dynamics of the filament contour length fluctuations in terms of effective polymerization ($U$) and depolymerization ($W$) rates, where again it is possible to disentangle non-ideal and confinement effects.Comment: 24 pages, 7 figure

On the Properties of a Bundle of Flexible Actin Filaments in an Optical Trap

We establish the Statistical Mechanics framework for a bundle of Nf living and uncrosslinked actin filaments in a supercritical solution of free monomers pressing against a mobile wall. The filaments are anchored normally to a fixed planar surface at one of their ends and, because of their limited flexibility, they grow almost parallel to each other. Their growing ends hit a moving obstacle, depicted as a second planar wall, parallel to the previous one and subjected to a harmonic compressive force. The force constant is denoted as trap strength while the distance between the two walls as trap length to make contact with the experimental optical trap apparatus. For an ideal solution of reactive filaments and free monomers at fixed free monomers chemical potential, we obtain the general expression for the grand potential from which we derive averages and distributions of relevant physical quantities, namely the obstacle position, the bundle polymerization force and the number of filaments in direct contact with the wall. The grafted living filaments are modeled as discrete Wormlike chains, with Factin persistence length, subject to discrete contour length variations to model single monomer (de)polymerization steps. Rigid filaments, either isolated or in bundles, all provide average values of the stalling force in agreement with Hill's predictions, independent of the average trap length. Flexible filaments instead, for values of the trap strength suitable to prevent their lateral escape, provide an average bundle force and an average trap length slightly larger than the corresponding rigid cases (few percents). Still the stalling force remains nearly independent on the average trap length, but results from the product of two strongly L dependent contributions: the fraction of touching filaments and the single filament buckling force.Comment: 21 pages, 8 figure

On the signature of tensile blobs in the scattering function of a stretched polymer

We present Monte Carlo data for a linear chain with excluded volume subjected to a uniform stretching. Simulation of long chains (up to 6000 beads) at high stretching allows us to observe the signature of tensile blobs as a crossover in the scaling behavior of the chain scattering function for wave vectors perpendicular to stretching. These results and corresponding ones in the stretching direction allow us to verify for the first time Pincus prediction on scaling inside blobs. Outside blobs, the scattering function is well described by the Debye function for a stretched ideal chain.Comment: 4 pages, 4 figures, to appear in Physical Review Letter

Excluded volume effects on the structure of a linear polymer under shear flow

The effect of excluded volume interactions on the structure of a polymer in shear flow is investigated by Brownian Dynamics simulations for chains with size $30\leq N\leq 300$. The main results concern the structure factor $S({\bf q})$ of chains of N=300 Kuhn segments, observed at a reduced shear rate $\beta=\dot{\gamma}\tau=3.2$, where $\dot{\gamma}$ is the bare shear rate and $\tau$ is the longest relaxation time of the chain. At low q, where anisotropic global deformation is probed, the chain form factor is shown to match the form factor of the continuous Rouse model under shear at the same reduced shear rate, computed here for the first time in a wide range of wave vectors. At high q, the chain structure factor evolves towards the isotropic equilibrium power law $q^{-1/\nu}$ typical of self-avoiding walk statistics. The matching between excluded volume and ideal chains at small q, and the excluded volume power law behavior at large q are observed for ${\bf q}$ orthogonal to the main elongation axis but not yet for ${\bf q}$ along the elongation direction itself, as a result of interferences with finite extensibility effects. Our simulations support the existence of anisotropic shear blobs for polymers in good solvent under shear flow for $\beta>1$ provided chains are sufficiently long.Comment: 36 pages, 11 figures, submitted to J. Chem. Phy

COVID-19 symptoms at hospital admission vary with age and sex: results from the ISARIC prospective multinational observational study

Background: The ISARIC prospective multinational observational study is the largest cohort of hospitalized patients with COVID-19. We present relationships of age, sex, and nationality to presenting symptoms. Methods: International, prospective observational study of 60 109 hospitalized symptomatic patients with laboratory-confirmed COVID-19 recruited from 43 countries between 30 January and 3 August 2020. Logistic regression was performed to evaluate relationships of age and sex to published COVID-19 case definitions and the most commonly reported symptoms. Results: ‘Typical’ symptoms of fever (69%), cough (68%) and shortness of breath (66%) were the most commonly reported. 92% of patients experienced at least one of these. Prevalence of typical symptoms was greatest in 30- to 60-year-olds (respectively 80, 79, 69%; at least one 95%). They were reported less frequently in children (≤ 18 years: 69, 48, 23; 85%), older adults (≥ 70 years: 61, 62, 65; 90%), and women (66, 66, 64; 90%; vs. men 71, 70, 67; 93%, each P < 0.001). The most common atypical presentations under 60 years of age were nausea and vomiting and abdominal pain, and over 60 years was confusion. Regression models showed significant differences in symptoms with sex, age and country. Interpretation: This international collaboration has allowed us to report reliable symptom data from the largest cohort of patients admitted to hospital with COVID-19. Adults over 60 and children admitted to hospital with COVID-19 are less likely to present with typical symptoms. Nausea and vomiting are common atypical presentations under 30 years. Confusion is a frequent atypical presentation of COVID-19 in adults over 60 years. Women are less likely to experience typical symptoms than men

Polymers under shear flow

info:eu-repo/semantics/nonPublishe

MD simulation of solid n-alkane layered structures and the interpretation of X-Ray and neutron scattering experiments

info:eu-repo/semantics/nonPublishe